Advantages:
1. 0.3°/hr bias instability;
2. <0.125°/√hr angular random walk;
3. 3°/hr bias stability.
Introduction
ER-MG-067, a high precision Tactical Grade MEMS Gyro with 0.3 deg/hr Bias of instability and 0.125°/ √h of Angular random walk, is a single-axis MEMS angular rate sensor (gyroscope) capable of measuring angular velocity up to a maximum of ±400°/s with digital output compliant to SPI slave mode 3 protocol. Angular rate data is presented as a 24-bit word.
ER-MG-067 is intended for industrial, instrumentation, stabilization, and other high performance applications.
An advanced, differential sensor design rejects the influence of linear acceleration, enabling ER-MG-067 to operate in exceedingly harsh environments where shock and vibration are present.
The ER-MG-067 is available in a hermetically sealed ceramic LCC surface mount package, and is capable of operating at 5V supply and a wide temperature range (−45°C to +85°C).
Features
Proven and robust silicon MEMS gyro
Up to ±400°/s measurement range
0.3°/hr bias instability
0.125°/√hr angular random walk
Digital output (SPI slave)
5V operation (4.75~5.25V supply)
Low power consumption (35 mA)
High shock and vibration rejection
Hermetically sealed ceramic LCC surface mount package (11x11x2mm)
Integrated temperature sensor
RoHS compliant
Applications
Azimuth, attitude, position measuring and keeping In GNSS-assisted INS
Heading , pitch ,roll measuring In AHRS for UAV
Motion survey and keeping in MRU
Attitude & azimuth keeping, positioning in IMU
Guidance, navigation, control in tactical MEMS weapon system
Stabilizing & Pointing in satellite antenna,target tracking system
Robotic Control & Orientation in Autonomous machines, Unmanned vehicles
Introduction
ER-MG-067, a high precision Tactical Grade MEMS Gyro with 0.3 deg/hr Bias of instability and 0.125°/ √h of Angular random walk, is a single-axis MEMS angular rate sensor (gyroscope) capable of measuring angular velocity up to a maximum of ±400°/s with digital output compliant to SPI slave mode 3 protocol. Angular rate data is presented as a 24-bit word.
ER-MG-067 is intended for industrial, instrumentation, stabilization, and other high performance applications.
An advanced, differential sensor design rejects the influence of linear acceleration, enabling ER-MG-067 to operate in exceedingly harsh environments where shock and vibration are present.
The ER-MG-067 is available in a hermetically sealed ceramic LCC surface mount package, and is capable of operating at 5V supply and a wide temperature range (−45°C to +85°C).
Features
Proven and robust silicon MEMS gyro
Up to ±400°/s measurement range
0.3°/hr bias instability
0.125°/√hr angular random walk
Digital output (SPI slave)
5V operation (4.75~5.25V supply)
Low power consumption (35 mA)
High shock and vibration rejection
Hermetically sealed ceramic LCC surface mount package (11x11x2mm)
Integrated temperature sensor
RoHS compliant
Applications
Azimuth, attitude, position measuring and keeping In GNSS-assisted INS
Heading , pitch ,roll measuring In AHRS for UAV
Motion survey and keeping in MRU
Attitude & azimuth keeping, positioning in IMU
Guidance, navigation, control in tactical MEMS weapon system
Stabilizing & Pointing in satellite antenna,target tracking system
Robotic Control & Orientation in Autonomous machines, Unmanned vehicles
If you would like more information please leave your email address and we will send you more detailed information or contact us in the link.
High Performance MEMS Gyroscope Factory - ERICCO China
Ericco's High Performance MEMS Gyroscope can be used in precision instrumentation, stabilization, guidance, navigation, control...
ericcointernational.com
Ericco Inertial System Supplier - ERICCO China
Ericco is a leading manufacturer of inertial navigation systems, gyro sensor, north seeker, Inertial management unit and INS.
ericcointernational.com
